- Product Info
R009 RF gate is made of aluminium alloy. Highlight RF gate is made by the most advanced technology (DSP), digital model distinguish technology (ADD/ RF), AGC control technology and QF scanning technology, with high sensitivity, excellent anti-interference ability and suitable for all of the RF 8.2MHz/ 10MHz EAS accessories.
Its advantages as below:
1. Wide and excellent detection performance.
2. Strong anti-interference ability, as below picture shows.
3. Stable, no false alarm.
Electronic Board Introduction
- TX board (transmitter)
2. RX board (receiver)
Before installation, please note:
a. The frequency is 8.2MHz or 10 MHz.
b. The distance between TX and RX antenna depends on the tags and labels you use.
Normally, for large square tag, 0.5m-2m, for 4x4cm label, 0.5m-1.4m.
c. RF gate should be at least 1 meter far away from big metal frame, elevator, cashier, the computer and so on.
d. Individual power supply is needed.
1. TX-RX connect
2. RX-TX-RX connect
Several RF systems in one entrance, all TXs should be synchronized. The JP3 in one TX board jumps to Master and all the others jump to Slaver.
The detail connection as below:
All kinds of EAS products are available in Highlight:
- Tel: +86-21-52353905
- Fax: +86-21-52353906
- Email: email@example.com
- Address: Block C, 5th Floor, TongPu Building, No. 1220, TongPu Road, Shanghai, China